Quantcast
Channel: Rifles - Athlon Outdoors
Viewing all 626 articles
Browse latest View live

Savage Arms Expands Revolutionary A17 Rimfire Autoloader Lineup

$
0
0

The following is a press release from Savage Arms

Long known for gun-making breakthroughs, Savage Arms has upped the ante in the target rifle market by expanding its revolutionary A17 autoloader selection with three new stylish yet hard-hitting straight shooters destined for range greatness.

The new A17 Sporter, A17 Target Sporter and A17 Target Sporter Thumbhole join the original A17, which in 2015 scored a victory for shooters seeking a high-performance rimfire autoloader capable of flawlessly handling the 17 HMR cartridge. All three models rely on Savage’s unique delayed-blowback action to deliver reliable semi-automatic operation with the powerful, low-recoil cartridge.

It’s no small feat, considering that past efforts by various gunmakers to build a smooth-cycling and affordable semi-automatic chambered for fiery 17 HMR loads have faltered.

RELATED STORY: 11 Autoloading Rifles From the GUN BUYER’S ANNUAL 2016 Buyer’s Guide

Savage engineers made it happen by scrapping the standard straight-blowback approach, which ejects spent casings via overpressure during firing. In its place, they opted for an innovative interrupter lug that locks down the bolt until peak pressure has passed when a round is fired.

The timing system prevents the bolt from opening prematurely, effectively putting an end to ruptured cases. By doubling as a firing pin block, it also prevents out-of-battery firing with an open action. Gains in control and accuracy further sweeten the deal.

Developed in 2002, the 17 HMR is a stellar choice for everything from small game and varmint hunting to serious target shooting and all-round plinking. It descends from a necked-down 22 Magnum case to accept a 17-caliber bullet, and offers advantages including a flatter trajectory, longer range, higher muzzle velocities and less risk of short-range ricochet thanks to bullet breakup.

To further heighten the shooting experience, Savage collaborated with sister company CCI to create the A17 Varmint Tip—a lightning-fast, flat-shooting load that extends range, improves terminal performance and takes accuracy to new heights. As a plus, the faster, higher-pressure ammunition aids in reliable bolt cycling regardless of mitigating factors such as elevation, field conditions or temperature.

RELATED STORY: Savage Arms’ Model 42 Takedown Rifle

The 17-grain, polymer-tipped varmint bullet provides rapid expansion, clocks in at a blistering 2,650 fps out of the muzzle and 2,000 fps at 100 yards, and delivers 265 foot-pounds of firepower at the muzzle and 151 at 100 yards. Although the round is tailor-made to Savage’s A17 family, all three models also easily accommodate standard 17 HMR loads.

Both new A17 Target/Sporter models offer all A17 standard features, including Savage’s adjustable AccuTrigger technology, which lets shooters easily fine-tune trigger pull to match their personal taste.

Other notable attributes include an extended charging handle for effortless loading, hard-chrome, stabilized bolt with oversized handle, and a flush-fitting, 10-round, rotary magazine with a dual-controlled feeding mechanism. Plus, the rear cover engenders fast field stripping for easy cleaning.

Designed to uphold Savage Arm’s longstanding commitment to bulletproof performance, the A17s also feature thread-in barrel headspace similar to the company’s legendary centerfires. Case-hardened receivers and 22-inch, button-rifled steel barrels are also standard issue, and all are sold drilled and tapped for scope mounts.

RELATED STORY: 20 Modern Rimfire Rifles From COMPLETE BOOK OF RIMFIRES 2015

In a nod to safer shooting, the A17s feature a bolt stop that easily locks the bolt in an open position when needed, along with a dual-safety trigger that blocks both hammer and trigger, preventing accidental discharge.

The A17 Sporter and A17 Target Sporter (heavy barrel) add a flat-combed, gray wood-laminate stock to the amenities, while the A17 Target Sporter, Thumbhole sports a heavy fluted barrel and, as the name implies, a gray wood-laminate thumbhole stock.

Like the original A17, which has a suggested retail of just $465, the three new models won’t trigger sticker shock. The A17 Target Sporter lists for $571, while the Target Sporter Thumbhole retails for $631. The A17 Sporter (non-heavy barrel) retails for $554.

Such price points are infinitely more affordable than custom magnum autoloaders of the past, and put Savage’s revolutionary delayed blowback technology and 17 HMR performance within easy reach of serious shooters from all walks of life.

For more information, visit http://www.savagearms.com.

The post Savage Arms Expands Revolutionary A17 Rimfire Autoloader Lineup appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.


Winchester’s 150th Commemorative Model 1866 Rifles

$
0
0

The following is a press release from Winchester

Oliver F. Winchester introduced a legendary brand to the world in 1866. And for 150 years since, generations upon generations across the globe have experienced life, with Winchester.

In celebration of its 150th anniversary in 2016, Winchester is offering a once-in-a-lifetime series of 10, pre-production rifles, chambered in 44-40, from the “One of Five Hundred” Model 1866 “Yellow Boy” commemorative rifle collection.

RELATED STORY: 6 Manufacturers Selling Lever-Action Rifles For Home Defense Or Hunting

Considered one of the most collectible rifles ever from Winchester, each firearm includes custom embellishments and identification through Baron Engraving. Each rifle will also come with a special box of commemorative ammunition and the magnificent 150th anniversary collectible medallion.

The rifles have been allocated to various industry and conservation organizations to help raise funds in support of the shooting sports and hunting heritage. More details on this commemorative lineup of rifles will be available throughout 2016 on Winchester.com and communicated through Winchester Ammunition social channels, including Facebook, Twitter and Instagram.

RELATED STORY: Winchester SXP Ultimate Defender and Marine Defender

“This is a very unique series of collectible firearms and ammunition that represents the Winchester brand and our 150 years of legendary excellence,” said Brett Flaugher, vice president of marketing, sales and strategy. “We are very proud to help raise awareness and dollars through our 150th celebration in 2016 that will benefit the hunting and shooting sports industry.”

About Winchester Ammunition

The iconic Winchester brand celebrates 150 years of legendary excellence in 2016—a historic milestone representing a steadfast commitment to the hunting and shooting sports traditions and future generations of sportsmen. A world leader in delivering innovative products, Winchester is The American Legend, a brand built on integrity, hard work and a deep focus on its loyal customers. Learn more about the history of Winchester by visiting www.Winchester.com or connect with us on Facebook at www.Facebook.com/WinchesterOfficial.

The post Winchester’s 150th Commemorative Model 1866 Rifles appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Smith & Wesson’s M&P15-22 SPORT Rifle

$
0
0

The following is a press release from Smith & Wesson

Smith & Wesson Corp. has introduced the new M&P15-22 SPORT, its most feature-rich M&P15-22 to date. While the first generation M&P15-22 has been widely recognized as the best .22 LR Modern Sporting Rifle (MSR) on the market, the new rifle carries the “SPORT” name and premium Magpul® accessories as standard equipment.

The M&P15-22 SPORT features a 10-inch M&P slim handguard that incorporates the popular Magpul M-LOK system. The M-LOK system allows rifle owners to easily customize their M&P15-22 SPORT by adding accessories without removing the handguard. M&P15-22 SPORT owners have the option of easily mounting numerous M-LOK-compatible accessories or any number of Picatinny-style rail sections designed to accommodate other accessories. Smith & Wesson includes a 2-inch M-LOK rail panel with each rifle.

RELATED STORY: Enhanced Snubbies – Smith & Wesson Model 627 & 327 Revolvers

The M&P15-22 SPORT comes standard with one of the most popular folding sights systems available for MSRs. The removable Magpul MBUS® front and rear folding sights are lightweight and durable, further enhancing the performance and value of the new M&P15-22 SPORT.

In addition to the standard matte black offering, the M&P15-22 SPORT comes in two of the most popular color options on the market – Kryptek® HighlanderTM and Moon Shine’s Muddy Girl® camo.

The M&P15-22 SPORT will also be available in a Performance Center® exclusive edition featuring an enhanced two-stage match trigger, match grade precision 18-inch threaded barrel and match grade chamber. The Performance Center model is also standard with a VLTOR® adjustable stock and Hogue® grip.

RELATED STORY: A Brief History of the Smith & Wesson .357 Magnum Revolver

“By starting with the market leading M&P15-22 rifle and building in enhanced standard features and value, we now offer consumers the opportunity to own a new, superior rimfire modern sporting rifle,” said Jan Mladek, General Manager of the Smith & Wesson and M&P brand. “The new M&P slim handguard with M-LOK allows the rifle to be easily accessorized while adding to its comfort during shooting. This new component along with the rifle’s standard high-quality features, allow the M&P15-22 SPORT to be ready for a day at the range right out of the box.”

The M&P15-22 SPORT base model has an MSRP of $449 and is sold with a limited lifetime warranty and a lifetime service policy.

For more information on Smith & Wesson’s M&P family of products, including the complete line of M&P15-22 SPORT rifles, please visit http://www.smith-wesson.com.

The post Smith & Wesson’s M&P15-22 SPORT Rifle appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Smith & Wesson Introduces the M&P15 SPORT II Rifle

$
0
0

The following is a press release from Smith & Wesson

Smith & Wesson Corp. today announced that it has expanded its popular M&P family of Modern Sporting Rifles (MSRs) with the introduction of the M&P15 SPORT II — a 2nd generation M&P15 SPORT rifle. Backed by the company’s reputation for high quality components and consistent, proven reliability, the new M&P15 SPORT II offers enhanced upgrades to the original, industry leading M&P15 SPORT rifle. Delivering a ready-to-go package with the additional features of a forward bolt assist and dust cover, the M&P15 SPORT II provides added value to this already time-tested platform.

RELATED STORY: 8 Smith & Wesson Compact Defenders

Dependable, accurate and engineered for a wide variety of recreational, sport shooting and professional applications, the M&P15 SPORT II provides the best combination of price and function. Manufactured on a forged upper and lower receiver constructed of 7075 T6 aluminum, the new M&P15 SPORT II is as rugged as it is capable. Chambered in 5.56 NATO, the new rifle has been fitted with a 16-inch barrel comprised of 4140 steel with a 1 in 9-inch twist. For added longevity, the rifle features a durable corrosion resistant Armornite® finish along with a chrome- lined bolt carrier, gas key and firing pin.

The M&P15 SPORT II comes with an adjustable, folding Magpul® MBUS® rear sight and an adjustable A2-post front sight. The standard rifle has been furnished with a six-position telescopic butt stock and a 30-round PMAG®. The MSR measures 35 inches with the stock fully extended and 32 inches collapsed. The M&P15 SPORT II has an unloaded weight of 6.5 pounds and is standard with an A2-style flash suppressor and a forged, integral trigger guard.

RELATED STORY: Smith & Wesson’s .460 Mag Family

The M&P15 SPORT II will also be available in state compliant models.

For more information on Smith & Wesson’s M&P family of products, including the complete line of M&P15 SPORT rifles, please visit http://www.smith-wesson.com.

The post Smith & Wesson Introduces the M&P15 SPORT II Rifle appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Turnbull Announces Limited Edition Engraved 1886 Rifle Series

$
0
0

The following is a press release from Turnbull Restoration & Manufacturing Co.

Turnbull Restoration & Manufacturing Co. of Bloomfield, New York is releasing a set of 4 designs based on the 1886 lever-action rifle. There will only be one of each of the four designs made, so these are destined to be genuine collectibles.

All four of the rifles will feature extra fancy American black walnut furniture, a 26 inch full octagon blued barrel and shotgun butt pads. The engraved receiver can be finished in either charcoal blue or Turnbull’s traditional method case hardening.

RELATED STORY: 6 Manufacturers Selling Lever-Action Rifles For Home Defense Or Hunting

“We have always had an affection for the 1886 at Turnbull,” commented CEO and Founder Doug Turnbull. “We felt this was the time to use this classic lever action rifle as a blank canvas for the firearm art that we are so proud of. Each of these will be more than a wall hanger. They will be fully functioning works of art in both manufacture and engraving.”

The four models are:

Limited Edition Turnbull #9 Engraved 1886 – chambered in .45-70, it features a #9 engraving pattern from the Winchester Highly Finished Arms Catalog and a checkered straight stock. The receiver is engraved with a fine ornamental scroll and richly detailed animal scenes. This is one of the most popular engraving patterns. The butt plate and forend cap are lightly engraved with an ornamental scroll to finish this rifle’s rich and attractive look. MSRP is $9,450. (web: http://www.turnbullmfg.com/gun/limited-edition-turnbull-engraved-1886-turnbull-mfg)

RELATED STORY: 10 Ultra-Reliable Lever And Pump-Action Rifles

Limited Edition Turnbull #6 Engraved 1886 – also chambered in .45-70, this rifle features a #6 engraving pattern from the Winchester Highly Finished Arms Catalog and a checkered straight stock. The receiver on this rifle is engraved with the finest ornamental scroll with a ribbon border surrounding animals done in fine line engraving. This style of engraving and finishing is highly recommended to achieve an attractive finish at a reasonable price. MSRP is $10,650. (web: http://www.turnbullmfg.com/gun/limited-edition-turnbull-6-engraved-1886-turnbull-mfg)

Limited Edition Turnbull Mod #10 Engraved 1886 – chambered in 475, this rifle features a modified #10 engraving pattern from the Winchester Highly Finished Arms Catalog and a checkered pistol grip stock. The receiver on the modified #10 is engraved with the finest ornamental scroll animal line engraving with exceptional detail. This style of engraving is the choice for ornamenting a firearm and results in a rifle with the look and feel of more expensive engraving styles. MSRP is $12,975. (web: http://www.turnbullmfg.com/gun/limited-edition-turnbull-modified-10-engraved-1886-turnbull-mfg)

RELATED STORY: Turnbull Announces New 1911 Commander Heritage Pistol

Limited Edition Scroll Engraved 1886 – also chambered in 475, this rifle features a scroll engraving pattern from the Winchester Highly Finished Arms Catalog and a checkered pistol grip stock. The receiver is engraved with a design derived from the classic American scroll engraving style and method of the 1850’s. This style features bold flowing scroll work and the classic punch dot background in the interior of the design for clean and highly attractive coverage. MSRP is $10,780. (web: http://www.turnbullmfg.com/gun/limited-edition-turnbull-scroll-engraved-1886-turnbull-mfg)

 

The post Turnbull Announces Limited Edition Engraved 1886 Rifle Series appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Choosing a Home Defense Gun: Pistols, Rifles and Shotguns

$
0
0

It’s 3 a.m. and a noise downstairs jolts you awake.

Your mind is scrambling when it comes again—angry voices and the sound of movement. You have your entire family in the home and they are spread across multiple rooms in the house. Your worst fear has just become a reality and it is time to step up and defend your family. The question now is which weapon will serve you best in this situation. While the above scenario is obviously fabricated for our story, it has been played out hundreds of times in reality. Long before a situation like this arises, you should educate yourself on what firearm will serve you best.

There are few things as vigorously debated as what is considered the “perfect” home defense gun. Some swear by the shotgun while others go the pistol or rifle route. There are many unique factors that you should consider when choosing a gun to use in your home. How is your home laid out? Do you have a large home that allows for easy maneuverability or a small home? Do you have thick block walls or thin drywall? Are you in a single-family dwelling or an apartment with neighbors on all sides? All of these items are points you should take into consideration before you choose a handgun, shotgun or rifle.

Regardless of our home design, we should pick a gun. Each of these weapons has strong pros and equally strong cons. Let’s break them down and explore the upside and downside of each and let you decide which one fits your needs.

Compact Protector

home defense, home defense firepower, home defense gun, home defense guns, pistol, pistols, shotgun, shotguns, rifle, rifles, home defense rifle, home defense pistol, home defense shotgun, handgun training

Your handgun training should include firing from unconventional, realistic shooting positions.

The handgun is the most prolific weapon seen in home defense arsenals. Its popularity is also based in its ability to be taken along as you leave the house for day-to-day life. The pros of a handgun for home defense are many. First off, the handgun is the smallest of our choices and easy to store. A handgun safe can take up less room than a shoebox and can be mounted anywhere inside the home. In fact, a current trend is to have two or even more safes placed within the home to avoid having to dash to a gun in an emergency. The size of the weapon also allows it to be wielded easily in close quarters. It is simply easier to use a smaller gun inside structures.

Modern semi-auto handguns can have the capacity to hold a large amount of ammunition as well. A standard magazine can hold 17 or more rounds. This brings us to a point to consider. If you choose a handgun, you will have a choice between high-capacity weapons such as most semi-auto guns or revolvers, which usually only hold five to six shots. When deciding, make certain that you will have the ability to reload quickly if the need arises. One unique pro found in handguns compared to others weapons is their ability to be used one-handed. This is critical when you may need to hold a flashlight or even a child.

RELATED STORY: 21 New Subcompact Pistols and Revolvers For 2016

The cons of handguns are evenly balanced. While the term “stopping power” can be vague, handguns generally are the least powerful of our three choices. Scientifically, the energy that is delivered by a handgun round is about a quarter of that found in 12-gauge buckshot and a third of what we find in an AR-style rifle. Handguns tend to be the most difficult weapons to shoot accurately as well. Their short sight radius mixed in with a trigger that requires more pull than the gun weighs can be a challenge. If you choose a revolver, then reloads will be a challenge. Unless you are Jerry Miculek, reloading your revolver will take precious time.

Handgun rounds have a high probability of penetrating most home surfaces as well. This is important to consider if you live in an apartment with little more that two sheets of drywall between you and neighbors. Of all the choices we have, the handgun is the one that requires the greatest degree of training and proficiency to use effectively inside the home.

Close-Quarters Carbine

home defense, home defense firepower, home defense gun, home defense guns, pistol, pistols, shotgun, shotguns, rifle, rifles, home defense rifle, home defense pistol, home defense shotgun, ar rifle

AR-style rifles are extremely popular because of their high capacities and terminal ballistics.

As with pistols, we have many options when it comes to what type of rifle we would choose for home defense. To keep us from getting lost in the weeds, we will look at the most popular rifle for the task: the .223/5.56mm AR-15 carbine. The carbine offers a more stable platform and is easier to shoot accurately under stress. With the ability to stabilize the gun against your shoulder and the addition of a red-dot optic and lights, the gun becomes very accurate. Unless you live in an anti-gun state, you will have the ability to use 30-round magazines with your rifle. This is by far the optimal setup for a gun.

RELATED STORY: Top 14 Home Defense Carbines On The Market Today

Having a large amount of ammunition allows you the ability to deal with a threat for a longer period of time before you must reload. Rifle rounds are superior to handgun rounds because of their velocity and fragmenting nature. With this they have a higher probability of stopping an adversary with fewer shots.

The cons of rifles begin with their size. A rifle is more difficult to maneuver through a home and requires special training to do it right. The velocity of the round can also be a con. While it provides effective wound channels, it has to hit the mark. Finally, you need to consider cost. Compared to a handgun, a well-made rifle can cost as much as two to three times more. This is prior to any additions made to the gun, such as lights, lasers or optics.

Shotgun Security

home defense, home defense firepower, home defense gun, home defense guns, pistol, pistols, shotgun, shotguns, rifle, rifles, home defense rifle, home defense pistol, home defense shotgun, shotgun defense

The pros of a shotgun are many, yet some perceived pros tend to be myth. While it will not blow a grown man off the floor and though a window, it does provide an exceptional punch. Using defensive buckshot ammunition, the shotgun has real-world stopping power. A well-placed shot can deliver nine .380 ACP-sized shots into a small target simultaneously. As with the rifle, it is a longer and more stable weapon to shoot and, when equipped with optics and a light, tends to be more accurate.

RELATED STORY: 10 Double-Barrel Shotguns That Deliver Instant Defense

The biggest con against a shotgun is its size. The long barrel that helps us get such accuracy makes it tough to move around corners and through doors. A very close second is recoil. Shotguns fire a large round package, and the push of that is real. For the untrained and those who do not practice regularly, it can be overwhelming.

We must also deal with the aiming myth of shotguns. Yes, you still need to aim. As we discussed previously, the spread for a shotgun in indoors distances is small. You can miss your target if you do not aim correctly. One last thing to consider as a con of shotguns is the reload. Shotguns are notoriously difficult to reload under stress. With their internal capacity ranging from five to eight rounds, the chances that you will need to reload is high. This requires training.

Choose Wisely

home defense, home defense firepower, home defense gun, home defense guns, pistol, pistols, shotgun, shotguns, rifle, rifles, home defense rifle, home defense pistol, home defense shotgun, personal defense

It would be difficult to just blatantly state that this gun is better than that gun. There are many moving parts that will go into your decision and you should weigh each one intensely. To survive a situation that forces you to break out a gun, you must have done your homework. Which gun do you shoot the best? How big is your home? What can you afford? These are not trivial matters, and they must be thought out before you make your choice.

RELATED STORY: A Look at Panteao’s Make Ready with Massad Ayoob – Home Defense DVD

The most important factor with any weapon is training. Under stress, you will not be the master marksman you may enjoy being on the range. Your groups will open up as your adrenaline starts pumping. The best way to prepare is through serious training and practice. Safely do a walkthrough in your home to find the tricky corners and blind spots. Consider all of this and choose wisely.

The post Choosing a Home Defense Gun: Pistols, Rifles and Shotguns appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Smith & Wesson’s Performance Center M&P15-22 SPORT

$
0
0

The following is a press release from Smith & Wesson

Smith & Wesson Corp. has introduced the new Performance Center M&P15-22 SPORT, a feature-rich .22 LR with a variety of upgrades from the Performance Center. Performance Center upgrades include a 2-Stage Match Trigger, as well as a Match-Grade Precision Barrel, Chamber and Trigger. The Performance Center M&P15-22 SPORT also includes hardware upgrades such as a VLTOR® Adjustable Stock and Hogue® Grip, as well as Magpul MBUS® Sights and M&P Slim Handguard with Magpul M-LOK that come standard on the rifle. For a full list of features, please visit www.smith-wesson.com.

RELATED STORY: Gun Review – Smith & Wesson’s Performance Center Ported M&P9 Shield

About Smith & Wesson

Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC) is a U.S.-based leader in firearm manufacturing and design, delivering a broad portfolio of quality firearms, related products, and training to the global military, law enforcement, and consumer markets. The company’s firearm division brands include Smith & Wesson®, M&P®, and Thompson/Center Arms™. As an industry leading manufacturer of shooting, reloading, gunsmithing and gun cleaning supplies, the company’s accessories division produces innovative, top quality products under Battenfeld Technologies, Inc., including Caldwell® Shooting Supplies, Wheeler® Engineering, Tipton® Gun Cleaning Supplies, Frankford Arsenal® Reloading Tools, Lockdown® Vault Accessories, and Hooyman™ Premium Tree Saws. Smith & Wesson facilities are located in Massachusetts, Maine, Connecticut, and Missouri. For more information on Smith & Wesson, call (800) 331-0852 or log on to www.smithwesson.com.

RELATED STORY: 30 Semi-Auto Rifles For Home Defense & Urban Survival

The post Smith & Wesson’s Performance Center M&P15-22 SPORT appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Kimber Introduces New 84M Hunter Rifle

$
0
0

The following is a press release from Kimber

Kimber Mfg., Inc., a leading American firearms manufacturer, today formally announced the launch of its newest bolt action rifle – the Kimber 84M Hunter. The 84M Hunter is a Sub-MOA bolt action sporting rifle that brings an unmatched level of performance and accuracy to meet the budget and demand of the everyday sportsman.

RELATED STORY: 15 Precision Rifles From Kimber

Based on Kimber’s legendary 84M action, the Hunter has a stainless steel barreled action wearing an innovative synthetic stock complete with a removable three-round box magazine, making it the perfect rifle for any weather or climate application. Weighing just 5 pounds, 5 ounces when chambered in .308 Winchester, the 84M Hunter delivers both light weight and exceptional accuracy across a selection of proven calibers.

“The 84M Hunter is truly an exceptional rifle designed specifically for the weekend hunter,” said Richard Kirk, Kimber’s director of marketing communications. “We pushed our engineers and designers to package the renowned performance and accuracy that Kimber is known for into an envelope affordable by most serious sportsmen – and they delivered.”

RELATED STORY: Micro .380 Defender – Kimber’s Micro Carry Advocate

Like all Kimber rifles, the 84M Hunter features a full-length Mauser claw extractor for true controlled-round feeding and extraction. Barrels, chambers and triggers are machined to critical match grade dimensions, and the 3-position wing safety is positive, silent and fast. The 84M Hunter is bedded on aluminum pillars to ensure both strength and accuracy.

The 84M Hunter is now shipping to a network of over 2,000 Kimber Master Dealers. The suggested retail price is $885.00, and is initially offered in five calibers; .257 Roberts, 7MM-08 Remington, 6.5 Creedmoor, .308 Winchester and .243 Winchester.

RELATED STORY: Kimber’s Pocket Companions – The Solo Crimson Carry & Micro Raptor Stainless

Kimber Mfg., Inc. is an American company that designs and manufactures premium firearms for individual, sporting, law enforcement and military markets. Complete information on Kimber firearms, accessories and Less-Lethal products is available at www.kimberamerica.com or by phone from Kimber in-house staff at +1 (888) 243-4522. A detailed product catalog is available upon request. Kimber can also be found on Facebook, Twitter, YouTube and Instagram.

The post Kimber Introduces New 84M Hunter Rifle appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.


Lyman’s Essential Rifle Mat For Gun Maintenance

$
0
0

Lyman’s new 10″ x 36″ Rifle Mat is the perfect accessory for shooters working on rifles or shotguns. Its firm, yet cushioned surface is perfect for assembling or disassembling firearms. It has molded-in compartments which keep small parts and screws handy, yet out of the way. In addition, the mat is chemical resistant and cleans up easily. Protect your firearm’s finish, as well as your bench with this full length rifle mat.

RELATED STORY: Lyman’s E-Zee Trim Hand Case Trimmer

• Chemical Resistant
• Made from synthetic rubber for a non-slip surface
• 10″ x 36″ dimensions fit most rifles and shotguns
• Molded-in storage compartments keep small parts secured and organized
• Protect your firearms and your bench

Price: $33.98 (MSRP) Part #04051 Essential Rifle Mat

RELATED STORY: No More Tumbling – Lyman’s Turbo Sonic Ultrasonic Case Cleaner

About Lyman Products

“Brands That Perform” means something at Lyman. Performance means more than just getting the job done. It means delivering value while advancing technology. Most important it means listening to the needs of shooters. In fact, the development of our products is most often directly linked to the feedback we get from our customers and the retailers who supply them. Whether pioneering the use of digital technology in reloading tools or reintroducing “antique” calibers and bullet moulds, Lyman continues to improve and innovate the tools used by serious shooters and reloaders.

For more information, visit http://www.lymanproducts.com.

The post Lyman’s Essential Rifle Mat For Gun Maintenance appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Savage Arms Unveils New A17 XP Scope-Package Rifle

$
0
0

The following is a press release from Savage Arms

Savage Arms is pleased to announce its launch of a new A17 XP scope-package gun. The new A17 XP model features a Bushnell A17 scope that comes mounted and boresighted, making it easier than ever for shooters to get from the store to the field or range. Shipments of this new rifle are being delivered to dealers.

Savage Arms made firearms history when it introduced the A17 in 2015. The platform is the first high-performance semi-automatic rimfire specifically designed for the 17 HMR cartridge, and its unique delayed-blowback action provides safe, reliable operation with standard 17 HMR loads.

RELATED STORY: 11 Autoloading Rifles From the GUN BUYER’S ANNUAL 2016 Buyer’s Guide

Features & Benefits

· First reliable semi-automatic rimfire platform designed for 17 HMR
· Bushnell A17 riflescope, mounted and boresighted
· Delayed-blowback action ensures safe, reliable cycling
· Hard chrome bolt with oversized bolt handle
· Case-hardened receiver and 22-inch button-rifled barrel
· 10-round rotary magazine
· User-adjustable AccuTrigger™

RELATED STORY: Home Defense 12 Gauge – Savage Arms’ Stevens 320 Shotgun

Part No. / Description / MSRP
47011 / A17 XP package rifle, 17 HMR / $578

Savage Arms is a brand of Vista Outdoor Inc., an outdoor sports and recreation company. To learn more about Savage Arms, visit www.savagearms.com.

About Vista Outdoor Inc.
Vista Outdoor is a leading global designer, manufacturer and marketer of consumer products in the growing outdoor sports and recreation markets. The company operates in two segments, Shooting Sports and Outdoor Products, and has a portfolio of well-recognized brands that provides consumers with a wide range of performance-driven, high-quality and innovative products for individual outdoor recreational pursuits. Vista Outdoor products are sold at leading retailers and distributors across North America and worldwide. Vista Outdoor is headquartered in Utah and has manufacturing operations and facilities in 13 U.S. States, Canada, Mexico and Puerto Rico along with international customer service, sales and sourcing operations in Asia, Australia, Canada, Europe and New Zealand. For news and information, visit www.vistaoutdoor.com or follow us on Twitter @VistaOutdoorInc and Facebook at www.facebook.com/vistaoutdoor.

The post Savage Arms Unveils New A17 XP Scope-Package Rifle appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Lipsey’s Launches Six New Ruger No.1 Rifle Configurations

$
0
0

The following is a press release from Lipsey’s

Lipsey’s, a nationally renowned firearms distributor, has been working behind the scenes with Ruger to deliver six new variations of the classic No. 1 rifle.

Beginning in 2015, Lipsey’s became the exclusive distributor of the Ruger No. 1 rifle series. Picking up the line was an easy choice given the loyal fan base and consistent selling cycle. The new No. 1 models offer the familiarity that sets the single shot apart, but also adds new variations and calibers that core rifle enthusiasts have been clamoring for.

RELATED STORY: Ruger’s GP100 Match Champion For Competition & Concealed Carry

The six new Ruger No. 1 model configurations are as follows:

· 1B Sporter chambered in 6.5 Creedmoor with 28″ barrel, blued with walnut furniture.

· 1S Sporter chambered in 35 Whelen with 24″ barrel, blued with walnut furniture.

· 1S Sporter chambered in 44 Magnum with 20″ barrel, blued with walnut furniture.

· 1V Varmint chambered in .243 Win with 26″ barrel, blued with walnut furniture and 1-in-7.7″ twist.

· K1RSI International chambered in .308 Win 20″ barrel, stainless with walnut furniture.

· 1A Light Sporter chambered in .275 Rigby with 24″ barrel, blued with walnut furniture and express sights.

RELATED STORY: Gun Review – Ruger 22/45 Lite

Jason Cloessner, Lipsey’s Product Development Manager, had some tough choices to make but couldn’t wait to take these rifles public. “The Ruger No. 1 is the ultimate “classic” rifle. The hardest part is deciding which configurations and calibers to go with. This year we will have several variations that have never been done before in order to give the No. 1 aficionado something new. Lipsey’s is proud to keep the tradition of the Ruger No. 1 going.”

The new Ruger No. 1’s are currently arriving at Lipsey’s and will be made available immediately.

Located in Baton Rouge, Lipsey’s was originally formed as a wholesale hunting and fishing distributor in 1953. Today, the company leads the firearms industry in the collaboration and distribution of exclusive firearms. An authority in NFA regulations, Lipsey’s also offers a robust line of silencers, short barrel rifles and accessories. With a committed focus on relationships, Lipsey’s provides value and innovation to federally licensed dealers and the industry’s top manufacturers.

For more information, visit http://www.lipseys.com.

The post Lipsey’s Launches Six New Ruger No.1 Rifle Configurations appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

PROOF Research: Pre-Fit Carbon Fiber Barrels for Savage Rifles

$
0
0

The following is a press release from PROOF Research

PROOF Research announced that they are offering pre-fit carbon fiber barrels for the Savage rifle, one of the most popular platforms for gun owners to customize. The pre-fit carbon fiber barrels from PROOF Research can be installed without the assistance of a gunsmith, although some special tools are required.

RELATED STORY: 30 Semi-Auto Rifles For Home Defense & Urban Survival

“By designing a carbon fiber barrel specifically for this platform, we’ve made it easy for Savage owners to extract every last bit of accuracy and handling performance from this iconic rifle,” stated Jason Lincoln, VP of Engineering and Product Development at PROOF Research. “Our barrels are up to 50% lighter than steel barrels of similar contour and cool 60% faster than stainless steel, resulting in virtually no point-of-impact shift during high-volume strings of fire. We believe there is no better choice for the custom gun builder who wants to build a precision long-range rifle.”

For the last several years PROOF Research has been proving that carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, and unprecedented durability. By combining their unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, they’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing.

RELATED STORY: Gun Review – Savage Arms Model 25 Walking Varminter Camo

The pre-fit carbon fiber Savage barrels are currently being offered by Stocky’s (www.stockysstocks.com) and arrive threaded and chambered in a variety of calibers including 223, 243, 6.5 Creedmoor, 6.5×284 Ackley 6.5×280 Ackley, 7mm REM MAG, 300 WIN MAG and 22-250.

About PROOF Research, Inc.
PROOF Research is a science-driven defense/aerospace company based in Northwest Montana committed to developing next-generation materials and composites to produce carbon fiber barrels and weapons systems that lighten warfighter load while increasing durability and effectiveness. PROOF Research’s goal is to make reduced weight, unsurpassed durability and match-grade accuracy a reality for all its customers.

Headquartered in Columbia Falls, Montana, PROOF Research maintains sales and manufacturing centers in Montana and Dayton, Ohio. For more information, please visit the company’s website at www.proofresearch.com.

The post PROOF Research: Pre-Fit Carbon Fiber Barrels for Savage Rifles appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Gamo Launches New “Whisper Fusion Mach 1” Air Rifle

$
0
0

The following is a press release from Gamo Outdoor USA

Gamo® Outdoor USA, the leading manufacturer of high quality air guns, optics and laser designators is launching the new Whisper Fusion Mach 1 air rifle. The new air rifle features the latest in Gamo technology – the IGT MACH 1™. The IGT MACH 1™ replaces the standard spring powerplant with an Inert Gas Cylinder. But the IGT MACH 1’s monster 33 milimeter cylinder delivers more Velocity and Terminal Penetration. The pneumatic cylinder propels pellets up to 1420 Feet Per Second in .177 Caliber and 1200 Feet Per Second in .22 Caliber (both with PBA Platinum Ammo). Not to mention smooth and consistent cocking efforts with constant power delivered to any pellet you fire. The Whisper Fusion Mach 1 line also offers the exclusive CAT™ (Custom Action Trigger) technology which allows Gamo air rifle owners the ability to independently adjust the first and second stages of their trigger.

RELATED STORY: 14 Umarex Air Pistols & Air Rifles From the GUN BUYER’S ANNUAL 2016 Buyer’s Guide

The Whisper Fusion Mach 1 features the Whisper Fusion technology developed exclusively by Gamo®, this new remarkably quiet air rifle includes the latest noise dampening technology that has been integrated into the steel barrel. Compared to standard air rifles, noise is reduced by up to 89.5%. The new SWA™ (Shock Wave Absorber™) recoil pad and molded cheekpad reduces felt recoil up to 74%.

This air rifle also features RRR™ (Recoil Reducing Rail) technology, developed to reduce the stress placed on your scope from the intense recoil of air guns and high-powered rifles. The patent pending two-piece aluminum rail is separated by dual polymer struts to absorb shockwaves. Once mounted to the Recoil Reducing Rail, the recoil stresses to internal components of the scope are reduced by almost 100%. All these technologies combined make this air rifle a must-have for any serious varmint hunter. Answering to consumer needs, the new Whisper Fusion Mach 1 also features a 3-9x 40 AO rifle scope.

RELATED STORY: How To Clean An Air Pistol

The Whisper Fusion Mach 1 Includes:

– IGT Mach 1 ™ Technology.
– Whisper Fusion™ Technology.
– Fluted polymer jacketed rifled steel barrel
– Rubberized grips
– All-weather black stock.
– Fiber optic front and rear sights
– CAT™ Custom Action Trigger
– RRR™ Recoil Reducing Rail
– SWA™ Shock Wave Absorber
– Fiber optics front and rear sights
– 3-9×40 AO Scope
– 5 Year Warranty
– MSRP: $249.99 (.177 and .22 Cal)

Whisper Fusion Mach 1™
– Velocity: 1420 FPS with PBA® Platinum (.177 Cal.)
– Velocity: 1020 FPS with PBA® Platinum (.22 Cal.)
– 33 mm cylinder, high power plant
– Single Shot.
– Break Barrel: Single Cocking System
– Trigger: Two stage adjustable CAT™ (Custom Action Trigger)
– Safety Manual

Gamo Outdoor USA is a leading consumer products company that designs, manufactures and markets a diverse portfolio of outdoor sporting goods products under such world class brands as GAMO®, BSA Optics®, Laser Genetics®, Aftermath®, and is the exclusive distributor of BSA Guns™ and Joker Knives®. For more information visit:

www.gamousa.com
Facebook.com/GamoOutdoorUSA
Twitter.com/GamoOutdoor
YouTube.com/GamoOutdoor

The post Gamo Launches New “Whisper Fusion Mach 1” Air Rifle appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Colt Releases New Expanse M4: The CE2000

$
0
0

Colt is broadening its Expanse M4 carbine product line with the release of the new CE2000.

RELATED STORY: General Officer’s Pistols – Colt Pocket Hammerless Model 1903 & 1908

“This was a natural move for us,” Justin Baldini, Product Director for Colt, said in a press release. “We simply listened to what our customers and our Colt Stocking Dealers were telling us, and the story was simple. Folks want the added features of a real Colt dust cover and forward assist, and they want it to come that way from the factory.”

Building on what customers know and love from the original Expanse M4 CE1000 — the Colt forgings, bolts and other parts used on the Colt M4 line — the new Expanse M4 CE2000 now includes a Colt dust cover and forward assist.

“We couldn’t be happier to deliver to our customers exactly what they want,” said Paul Spitale, Senior VP at Colt. “It’s a proud moment to be able to build on the success we’ve had with the Expanse™ M4 in a way that provides an even better ownership experience to the discerning firearms enthusiast.”

RELATED STORY: Gun Review – Colt Defender .45 ACP

Chambered in 5.56 x 45 NATO (.223 Rem.), the CE2000 is a great option if you’re looking to build your ideal modern sport rifle or if you’re a collector. The Expanse M4 CE2000 is available at a retail price of $749.

About Colt’s Manufacturing Company LLC      

Colt’s Manufacturing Company LLC is one of the world’s leading designers, developers and manufacturers of firearms. The company has supplied civilian, military and law enforcement customers in the United States and throughout the world for more than 175 years. Our subsidiary, Colt Canada Corporation, is the Canadian government’s Center of Excellence for small arms and is the Canadian military’s sole supplier of the C7 rifle and C8 carbine. Colt operates its manufacturing facilities in West Hartford, Connecticut and Kitchener, Ontario. For more information on Colt and its subsidiaries, please visit www.colt.com.

The post Colt Releases New Expanse M4: The CE2000 appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Gun Review: The Steyr AUG M3 A1

$
0
0

Way back in 1985, I had the great good fortune to be sent by my police department to a training class with John Farnam and his itinerant “Have Duelatron, Will Travel” operation. You always got (and get) excellent value for your time and money with John, and a bonus at that two-day class was Manny Kapelsohn sitting in for one of the classroom sessions. I’d never met Manny before, but I’ve never forgotten the impression he and his radically new travelling partner made on me that day. By this I don’t mean John Farnam, but the Steyr AUG Manny introduced to the class.

Manny, by the way, is now the president of Peregrine Corporation and carries with him a long background in firearms and training consultation. He also holds degrees from Yale and Harvard and is a practicing trial attorney. In other words, he knows up from down and is very qualified to speak on everything in between.

That AUG was, 30 years ago, quite a thing in my neighborhood. Bullpup? What’s a bullpup? Where’s the rest of the gun? That’s a 5.56mm? That’s a full-length barrel in there? A built-in scope? A doughnut reticle? The action’s behind the trigger? The ejection is switchable from left to right? A forward hand grip? A see-through mag? Well, that’s something different!

As Manny took the floor with his spacy new gun and went through it point by point, it became quite obvious that he did know his stuff, and that his odd-looking duck of a pup had some serious pros on board. The AUG was undeniably intriguing. I waited and watched afterward, but the AUG ran into numerous political and manufacturing stumbling blocks as time went by, and I eventually gave up on the platform.

Then came the day when Steyr began to conspire with Vltor to manufacture in the U.S., followed by the October 20, 2014, announcement of the new multi-configurable AUG A3 M1 in three versions: a Short-Rail variant, a High-Rail variant and an updated Integrated-Optic model with either a 1.5x or 3x built-in scope reminiscent of the original AUGs. And the company even gives you a choice of color on the stocks now, so you can pick between black, OD green or the fashionably popular mud shade, all to properly coordinate with either your eyes or your web gear. The AUG finally appeared to be solidified and established (and I’ll admit it was the mud finish that tipped the scale for me), so it was time to check one out.

CQB Elite

steyr, Steyr AUG M3 A1, AUG M3 A1, AUG M3 A1 beauty

Bullpups in general can be hard sells for traditionalists, but they do have a very valid place, and the AUG is one of the best. For use in confined spaces and tight transport with full-powered rifle calibers, you can’t beat a bullpup without going the short-barreled-rifle (SBR) route, which demands more federal forms than most of us want to bother with on top of that $200 tax stamp, all while compromising terminal ballistic figures. Bullpups can also travel across state lines without having to notify the BATFE people in writing first, as you do with a Class III SBR.

The bullpup places its action and a good part of its barrel inside the stock, behind the trigger and rear handgrip area, drastically shortening the overall length without drastically shortening either the barrel or the shoulder reach. The weight shifts to the rear along with the relocated action, which obviously changes the balance substantially. The bullpup design does make it damnably difficult to perform those flashy parade drills with full-length service rifles like the M1 Garand, and, quite frankly, the Queen’s Guard at Buckingham Palace lost a certain amount of panache in switching over to the L85A2 from the longer L1A1, but that’s another story.

RELATED STORY: Striking Nine – The Steyr S9-A1 Pistol

By shortening the rifle to something like the AUG’s 28.15 inches, it’s a package that maintains constant readiness without fiddling with a retractable (and less sturdy) folding or sliding stock, and it offers full-barrel-length ballistics without the necessity of dropping down to 10-inch velocities. It travels in containers and compartments where standard carbines can’t fit, and works tight angles and areas where a longer barrel is only a handicap.

The bullpup can be less in the way for on-body sling carry, and it’s a natural for working building interiors where the off-hand may be needed for mundane things like doorknobs and obstacle removal. The bullpup is usually more dynamic on the shoulder with most of its weight at the rear, and it can be quite easy to fire effectively one-handed either on or off the shoulder at CQB distances. A reliable bullpup can be an ideal setup for home defense, and it’s a great choice for a car or truck gun where inclinations dictate and legalities permit.

AUG Origins

steyr, Steyr AUG M3 A1, AUG M3 A1, AUG M3 A1 foregrip

The Steyr AUG A3 M1 features a folding foregrip as well as a tulip-style flash suppressor.

AUG development dates back to the 1960s, when the Austrian Army first fielded the select-fire StG 77 in 1978. Radical enough at the time in overall conception, instead of a selector switch, it also used an obscure and less-than-ideal dual-mode trigger that fired in semi-auto by pulling it back halfway, and fully automatic by pulling it back the rest of the way.

A gas-piston system drove the action, the stock was made from an early polymer, the magazine well was positioned behind the rear hand grip, the mags were translucent to show contents at a glance, the cocking handle and ejection were both reversible, a crossbolt safety was used, the front hand grip folded forward for storage, quick-detach barrels fitted with flash suppressors were easily swapped out, and the gun was equipped with a built-in 1.5-power Swarovski optic featuring a reticle that came to be known colloquially as the “doughnut of death.”

The reticle consisted of a small, plain, hollow circle in the center sized to function as a simple rangefinder by completely containing an average-sized man (5’ 11” at the time), head to toe, at 300 meters. Once zeroed, placing the doughnut in the center of a target could pull off a hit out to that distance. The AUG has since been adopted in 10 or so other countries worldwide, including by U.S. Immigration and Customs Enforcement.

Back In Action

steyr, Steyr AUG M3 A1, AUG M3 A1, AUG M3 A1 rails

Of the three newest Steyr AUG A3 M1 configurations, while the versatility of an optic rail is undeniable, the integral optic was a major element of the AUG that stuck in my mind over the last three decades, and that was the variant I had to have as my T&E sample. The 1.5-power optic on the new guns would have been a more authentic throwback, but the 3x is more effective over longer distances, so that choice was easy.

Steyr duly shipped one standard, mud-finished, 16-inch-barreled AUG that was set up for right side ejection and left side cocking, along with three waffled mags in 20-, 30- and 42-round capacities. An easy-to-follow instruction manual was also included. The AUG was configured for a righty, which I happen to be, but it carries the modularity of the originals with a left-handed bolt and 18-, 20- and 24-inch barrels as optional buys from Steyr Arms.

RELATED STORY: Looking For A Full-Size Concealed Carry Pistol? Try Steyr’s L40-A1

Maneuvering the AUG around the house, and in and out of the car, before its day at the range proved the bullpup concept was much handier than any AR or shotgun I ever cleared buildings with. Tucking it under the arm left very little to grab or deflect in rounding tight corners where space didn’t allow for more distance in slicing the pie, yet it was still ready for a point-blank shot if needed.

While slightly less handy, but still short and tight, it’s also dynamic in maneuvering one-handed on the shoulder with its muzzle up or down, as indicated while opening doors and entering rooms. Having most of the weight behind the firing hand, instead of hanging out in front, makes a major difference. Exiting the car (depending on how you carry the AUG in one) involved far fewer contortions than hauling a 20-inch-barreled AR or M16 did back when I did that for a living.

Scope It Out

steyr, Steyr AUG M3 A1, AUG M3 A1, AUG M3 A1 buttplate

Releasing the buttplate provides access to the trigger group and a small triangular storage space for a cleaning kit.

The AUG’s 3x scope’s worth the utility upgrade, and it does retain the older doughnut reticle, though it now adds conventional crosshairs that meet in the center for more precise aiming on smaller or less-exposed targets. The two horizontals are thicker for most of their length, thinning down to the same size as the verticals by the time they converge inside the circle.

The entire optic tower is beefed up compared to the original AUG, which means it’s correspondingly stronger, and Steyr’s rep says it can safely be used as a carry handle, being attached to the receiver by three hefty and Loctited screws. “You could probably drive nails with that scope attached to the receiver” was the exact quote. The integral optic system is stronger than the AUG’s other rail, mount and add-on optic options, but I won’t argue it. I’ll just keep on preferring it.

For backup dots or other accessory points, the scope housing does include a full-length Picatinny rail numbered to 15 on top, a 2-inch rail section on its right side (both integral and non-removable), and another 2-inch, screwed-on rail section down on the receiver’s right side. The glass is fully adjustable for windage and elevation, and bright and clear with well-recessed, protected lenses at both ends to resist breakage or scratching. While the AUG A3 M1 has plenty of room to hang lights and lasers, you may not want to get too carried away—the downside of the package is that it’s already a heavy one at 8.15 pounds empty.

The AUG’s takedown procedure is simple, and it starts up front with a push-button barrel release for easy off-gun cleaning or 10-second barrel-length changes. It then moves to the receiver lock just in front of the magazine, and it ends at the rear with a push-button buttplate release that opens up the aft end to pull out the trigger group and also reveal a tabbed-cover storage space for the onboard cleaning kit that Steyr sells separately.

The gas piston is easily serviced, although the gun runs so clean you won’t need to bother much, and it’s also adjustable for standard ammunition (normal position) or underpowered loads. The adjustment capability also compensates for a dirty gun, dirty ammo, extreme cold and other “gotchas” that tend to shut down other designs, and the non-reciprocating charging handle can function as a forward assist if needed.

I’m not all that fond of the crossbolt safety, and Steyr should include a small file (if not a Dremel) to remove those blood-inducing sharp corners, but it’s learnable. So is the left-side bolt release, located just above the ambidextrous mag release behind the magazine. The AUG demands its own operational protocols, and you should make them automatic if you plan to use one for serious applications.

Taking Aim

steyr, Steyr AUG M3 A1, AUG M3 A1, AUG M3 A1 rifle

Firing with the foregrip folded forward and resting on a sandbag, the AUG launched 50-, 62-, 64- and 77-grain bullets through its chromed, cold-hammer-forged, 1-in-9-inch-twist barrel at black 100-yard bullseyes with no break-in period, no malfunctions and only a couple drops of oil applied.

RELATED STORY: Gun Review – Steyr Arms L9-A1 9mm

The optic was excellent, the trigger was not (running past my 8-pound scale), but that’s the result of the long bullpup trigger linkage, and it can be improved with aftermarket units. The AUG’s accuracy proved it to be a truly battle-ready rifle, with best five-shot groups in each load all holding under 3 inches and Black Hills’ 77-grain load consistently pulling off groups under 2 inches.

You’ll need to adapt your shooting positions with the AUG to fit your physique; I found that using my support hand on the front of the oversized polymer triggerguard instead of the foregrip worked better while in prone, sitting and kneeling positions. After working with the AUG, I wish it had come along three decades earlier in this form. It would have spent many long, dark nights working the third shift on the West Side with me. Even out of uniform, if you’re in the market for a house gun or a compact 5.56mm to travel with around town or on the open road, the AUG A3 M1 has a lot to offer.

For more information, visit http://www.steyrarms.com or call 205-417-8644.

This article was published in the 2016 issue of Gun Buyer’s Guide. For information on how to subscribe, please email Subscriptions@athlonmediagroup.com or call 1-800-284-5668

Save

Save

The post Gun Review: The Steyr AUG M3 A1 appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.


4 Reliable Factory Custom Shops For Your Next Rifle Build

$
0
0

Every sportsman should experience hunting with a true, one-of-a-kind, made-just-for-you custom rifle. If you have logged on the websites of some of the best one-man shops around the country, it’s no surprise how deep (read: expensive) you can get with regards to high-grade wood, engraving and a blueprinted barreled action.

On the other hand, many years back, I found there are so-called custom shops that are in fact in-house facilities within the plants of well-known firearms manufacturers like Remington, Weatherby or Browning. Still others like Dakota produce firearms for the general public, with the bulk of their work generating guns in a variety of bolt and single-shot actions for the discriminating field hunter.

Factory custom shops depend on the input of folks like you and me, and sadly, if the economy is sour, a gun of this high a caliber is the last thing a family needs as it considers apportioning its expendable income.

Winchester had a great custom shop down in New Haven, Connecticut. I know, because in 1986 I ordered a Model 70 with high-grade wood chambered in the .300 Win Mag back. Ruger had a similar shop in New Hampshire, but again, a change in upper management and the sluggish economy have closed the door on that option, too. I have also depended upon Thompson/Center for custom guns and barrels for my wildcat projects, and while they still seem determined to keep their shop open, their website has the following message: “Due to our restructuring of the T/C Custom Shop, we are temporarily halting our custom shop barrel process so that we can evaluate and improve it. A date for re-launching the Custom Shop has not yet been determined.”

What we are left with in the factory custom shop category are guns from Remington, Weatherby, Browning and of course Dakota—which is a good thing, as the costs of building through a major manufacturer can be sometimes as little as one-third the expense of running your order through the one-man shops of the better-known custom builders. How do they cut the expenses? It’s simple: The hosted shop literally takes the guns from the production side next store, eliminating the need to build actions from the ground up. Now, I am not saying that they just take a barreled action, place it in a nice piece of wood and call it a “custom.” There is a lot more to it than that.

Granted, they get the raw materials like the action and barrels from the production run, but here the similarity ends. From here the action is honed for smoothness, headspace is checked and tightened, and the barrel is checked for straightness and fired for accuracy. On most, the trigger gets a final touch for a crisp pull, and then it goes to the stock maker for that priceless piece of wood.

Remington

rifle, rifles, factory custom shops, factory custom shop, custom shop, custom rifle, custom rifles, remington shop

The author had the pleasure of spending a day with the crew in the Remington shop.

Remington moved the Remington Custom Shop in 2015 to Sturgis, South Dakota.  Sturgis is now Remington’s center of excellence for Custom; Dakota, Nesika, Marlin, and Remington. They welcome visitors openly, and you can watch from a raised platform as craftsman busily engrave, profile wood or set an action into a stock. I have three rifles from the shop and can testify to their quality and shooting ability.  My custom 40-XR (now being reintroduced) rimfire is perfect for small game; my 25/06 Model 700 has taken antelope in Montana; and my M700 in .222 Rem was made up for me with a number of special requests to include a fuller stock and medium-weight barrel. This is my favorite “walking” varmint rifle, and it has served me more than well in the field. While most follow pretty much the same format, let me briefly outline what you can expect from Remington.

RELATED STORY: Micro To The Max – Remington’s RM380 Pistol

First, you start out with roughly 50 cartridge choices, which can be anything from the petite .17 Rem Fireball upwards to the larger Magnum offerings like the .458 Win.  You can choose a barrel length from 16 inches to 30 inches, right- or left-handed, iron sighted or clean. Metal finish can be bright or subdued, and the wood goes from Claro, American or English walnut. Classic or modern stock designs are there for the asking, forend tips in rosewood or ebony and the grip cap can be stylized to include rosewood, ebony, solid steel or even a skeletonized cap. Finish can be gloss or oil, and you can order a traditional buttpad in “Old English” or a skeleton-type plate. Length of pull is up to you, and you can even have a nameplate with your initials inscribed.

Other than that, the sky is almost the limit, and for those who want something different, consider the No. 1 Rolling Block (no longer produced), African Plains Rifle and a host of other rifles that fall under the Hunter Grade banner. These include the North American Custom with satin blued or stainless actions. Along with the African Plains Rifle, the African Big Game (no longer produced) rifle is stocked with a laminated hardwood stock and a 26-inch barrel with an old-world contour. It can be had chambered in a variety of big-game cartridges. One of my favorites, the Model Seven Custom MS (Mannlicher Stock), is still listed with a large number of match (Model’s 40-XBBR KS, 40-XB Rangemaster, 40-XB Rangemaster Thumbhole Stock, 40-XB KS) and tactical rifles, while the Model 547 Classic replaces the 40-XR rimfire rifle. While I consider the 40-XR’s reintroduction to be a win, this new entry follows the custom trend with a bedded action based on the previous Model 504. Still another advantage with this gun is that the bolt has been reconfigured to emulate the feel and angle of the popular Model 700 centerfire rifle, with a stock profile to match.

Additionally, there is now a Model 700 Custom C, D and F grade that is available on a shorter turnaround, and while it includes most of the usual accouterments, engraving is not available on this “basic,” almost off-the-shelf custom rifle. Finally, high-grade shotguns in the form of the Model 1100 and Model 870 are still on the list and can be ordered with everything from a custom stock to heavy engraving. For more information, visit remington.com or call 605-347-4686.

Weatherby

weatherby, weatherby mark v royal ultramark

Weatherby Mark V Royal Ultramark

As a young boy, I can remember enjoying reading Weatherby “wish books” on my bed on cold and rainy days. Just about every year, those thick books arrived, and in the back was a section on custom rifles. Well, the book seems to have died in the ensuing years, as did, at one point, the custom shop; but a few years back, the shop reopened for business. According to the custom shop spokesperson at Weatherby, they make the custom building process easy. They call it a three-step process: First you choose the barreled action, add the features to that action that you desire and finally you build a custom stock to your personal specifications.

If you are a Weatherby fan, the options are wide open. Naturally, the Weatherby proprietary cartridges are on the top of the list with barrel lengths starting at 24 inches and maxing out at 30 inches, with the options of a chrome-moly Krieger barrel, two, three or four contour, fluting and even a hand-honed action (which I fully recommend). High gloss is an extra cost option; matte blue is included in the price of the action. From there, you can pick and choose features like a kid in a candy shop.

RELATED STORY: Top 10 Features of the Weatherby PA-459 8-Shot Shotgun

You can have the bolt checkered, have rings and bases installed or opt for receiver sights.  Engraving goes from a simple Grade 1 to Grade 6, and you have a choice on which game animal you would like to have etched on the floorplate. My favorite part of the whole affair is the choice in wood, and Weatherby seems to spare no expense in providing an array of quality wood types, stock shapes, carving or checkering, recoil pads, lengths of pull and the usual pistol grip or forend tips. Remember those inlays that years back were trademarks of Weatherby rifles? Well, they are available and in a number of different configurations as is the choice of taking a production rifle and adding some personal features.

Additionally, Weatherby lists what they call “pre-packaged” rifles for those who do not want to wait up to a year for their rifle or need something for an up-and-coming hunt this fall. Among these is the popular Euromark, which was reinstated in 2011. Those ordering the Euromark will be treated to an out-of-the-ordinary (for Weatherby) oil finish and a smaller six- or nine-lug action, instead of the larger nine-lug action for standard calibers. The Mark V Royal Ultramark has exhibition-grade walnut, engraved accents on the barrel and muzzle, and a floorplate engraved with a scroll pattern. The Mark V Safari has one of my favorite checkering patterns—finished off with “AAA”-fancy French walnut, it’s a showstopper for sure. For those who want a heavy-hitting gun with a synthetic stock, take a look at the Mark V Dangerous Game Rifle (DGR). The Mark V Outfitter features a raised-comb composite stock, hand-honed action and left-handed models chambered in .257 and .300 Weatherby Mag. Finishing off our package rifles, the Weatherby Mark V TacMark is made for long-distance or tactical law enforcement duties. For more information, visit weatherby.com or call 800-227-2016.

Browning

rifle, rifles, factory custom shops, factory custom shop, custom shop, custom rifle, custom rifles, remington shop, rifles, rifle engraving, engraving

Browning is noted for its high-grade production guns. At its famous engraving shop in Belgium, the company will favor your order on everything from side-by-sides, over-and-under shotguns, express rifles, semi-automatic rifles (the famous BAR), .22 rifles and even the Hi-Power pistol engraved in no less than four impressive patterns.

RELATED STORY: Browning M1911 .45 ACP Pistol | 1911 45 ACP Handgun

I have always been a fan of the Superposed for upland hunting. Presently called the B25, you have a choice of more than two-dozen engraving patterns on this shotgun alone. The sample I had for photography has both a pheasant and a duck on the receiver, and it comes complete with floral engraving—all set on a natural finish. All of the wood is above average, with the proper grain, color and finish that will announce to all and sundry that you do indeed have in your hands a custom gun. For more, visit browning.com or call 800-333-3288.

Dakota

Dakota Model 76, dakota, dakota arms

Dakota Model 76

Dakota has a wide selection of custom-made guns with just about every custom feature you can dream of on your rifle. The famed Model 76 is available in five different versions, from the Classic to the hard-hitting African. The Traveler is a unique weapon in that it breaks down into two sections that can be ordered with various barrel combinations in different calibers. The Model 10 is a single-shot offered in various calibers and stocks and with an assortment of possible features.  Dakota’s Model 97 is a traditional weapon for the well-seasoned hunter. For small-game hunters with deep pockets, the Varminter is made to benchrest tolerances and is chambered in a long list of short-action varmint cartridges, including one of my personal favorites—the .20 VarTarg.

Also available is a Sharps replica chambered for both vintage and modern cartridges and scaled to 80 percent of the original size, making it a sleek rifle for hunting. The Miller is another single-shot, which is chambered for both commercial and wildcat small cartridges to include my all-time favorite—the .219 Donaldson Wasp. While I am partial to smaller cartridges in a single-shot, the Miller can be chambered in calibers ranging from the .17 Ackley Hornet to the .416 Remington Magnums—and beyond!

I have to say, the list of options, calibers and wood grades fills the better part of the Dakota catalog, and if there is something wanting, I cannot find it. With its various checkering patterns, grip caps, recoil pads proprietary cartridges and very high-grade wood, finishes and engravings, Dakota does its best to earn your hard-earned dollar. For more information, visit dakotaarms.com or call 605-347-4686.

In all of my experiences ordering and shooting custom rifles, I have never been disappointed with any of the shops with which I have dealt, and I look forward to trying out the newer rifles in the future. Truly, a factory custom shop is the place where dreams come true.

This article was published in the 2016 issue of Gun Buyer’s Guide. For information on how to subscribe, please email Subscriptions@athlonmediagroup.com or call 1-800-284-5668

Save

Save

Save

The post 4 Reliable Factory Custom Shops For Your Next Rifle Build appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

The AirForce Texan: Not Your Grandfather’s Air Rifle

$
0
0

I cut my teeth on pellet guns when I was a kid. I actually burned through three of them during the course of my childhood. I watched those poor guns go from bright and shiny in the store, to repaired more times than I could count, to reluctantly being discarded with honor in favor of something better. I squeezed those triggers until they were literally garbage. In those days I used my pellet rifles to shoot venomous snakes, ventilate discarded beverage cans, nail the occasional errant squirrel and generally keep my little world safe for democracy. My, how times have changed.

Lots of things have evolved during my half-century on this planet. Electronic sights were unimaginable in my youth. The cell phone and the internet were the stuff of science-fiction writers. Also, air rifles were toys for kids to use until they graduated up to real guns. Nowadays, with the advent of the AirForce Texan pre-charged air rifle, a sportsman of modest means can use an air rifle to put a whitetail buck on his wall. So long as he was meticulous about his craft, he could conceivably bag a black bear with an air rifle. But, of course, this requires something more than your typical air rifle.

I have a pre-charged, .25-caliber AirForce Escape air rifle that is almost unnaturally accurate. As the trigger trips a valve rather than a sear, its action just seems globally smoother. The ergonomics of the futuristic-looking rifle are superb and the power behind the pellets is prodigious. However, all that pales in comparison to the Texan.

AirForce Texan, AirForce Texan air rifle, AirForce Texan rifle, airforce airguns, airforce texan details

An onboard gauge helps the shooter keep track of remaining pressure. Experience with the gun makes it easy for shooters to gauge how it will perform at various pressure levels.

The Texan pushes .45-caliber bullets at speeds of up to 1,000 fps. In its optimized configuration, it produces some 500 foot-pounds of muzzle energy. To put that in perspective, that’s 1.5 times more powerful than the typical .45 ACP government round, which is itself a proven stopper. In the right hands, the Texan is proof against most wild game animals in North America.

RELATED STORY: 14 Umarex Air Pistols & Air Rifles From the GUN BUYER’S ANNUAL 2016 Buyer’s Guide

The trigger breaks sharply and crisply at 2 pounds, and the cocking handle employs compound leverage to make the 22-pound cocking force seem miniscule. The 490cc onboard air tank holds up to 3,000 pounds per square inch of pressure. A single charge is good for 12 to 15 shots depending on bullet weight and selected velocity. The rifle itself has a tuner to adjust velocity and, subsequently, power. Practicing with the rifle and optimizing the loads it fires is half the fun. Running the gun is like handloading your ammunition one round at a time off the bench.

Powering the rifle is theoretically possible with a hand pump, and I keep one handy just in case. However, pressurizing that big tank to 3,000 psi with a hand pump is a workout of the highest order. A much more civilized approach is to use a scuba tank. Any place that services scuba tanks can fill your tank for you. I scored a brand new scuba tank from Amazon for less than $200, including delivery. Our nearest scuba store will fill the tank for $10 a pop. Be forewarned that your typical box store air compressors will not even come close to the pressures needed to service your tank.

AirForce Texan, AirForce Texan air rifle, AirForce Texan rifle, airforce airguns, airforce texan ammo

This is a new sort of rifle and ammo providers are cooking up projectiles to meet demand as I type these words. Hunters Supply specializes in cast lead bullets and carries more options than you might reasonably use. Hunters Supply offers literally one-stop shopping for anything you need to feed your serious air rifles or black-powder weapons.

The bore of the Texan slugs out to 0.458 inches, so .457 projectiles fit perfectly. Options range from 143-grain soft-lead round balls all the way up to massive 405-grain slugs as big as your finger. The 143-grain balls will flirt with 1,000 fps when fired and yield 12 or 13 proper shots from a tank. The huge 405-grain monsters still push north of 700 fps from a full charge and hit downrange like a freight train.

Most all rifles have a favorite load, and working that up with the Texan is great fun. Hunters Supply has the bullets to customize the performance you want from this unique rifle. I found the 350-grain bullets to be a good combination of accuracy and downrange thump.

Pushing The Limits

AirForce Texan, AirForce Texan air rifle, AirForce Texan rifle, airforce airguns, airforce texan profile

This isn’t your grandfather’s air rifle. The AirForce Texan throws massive bullets remarkably fast. That means it cracks like a real rifle and sports the recoil to boot. Mass times velocity in one direction always equals mass times velocity in the other direction. That’s not just a good idea; it’s the law. What that means practically is that this air rifle actually kicks a bit. It is not fearsome enough to be unpleasant, but you’ll know you are shooting a serious gun.

RELATED STORY: DIY Tips – Building Your Own Airgun Range

To load the rifle, charge up the onboard tank from your scuba tank, or, if you are seriously into fitness, use a manual pump. Filling the onboard reservoir from a scuba tank takes maybe 15 seconds. Run the charging lever forward to open the action and place a bullet in the breech. Now close the action with the lever. The safety resets itself with each cycle, so it must be manually deactivated with each shot. The trigger has an entirely predictable take-up and a very sweet, crisp break.

AirForce Texan, AirForce Texan air rifle, AirForce Texan rifle, airforce airguns, airforce texan rifles

From the perspective of a guy who has been compulsively squeezing triggers ever since he could walk, the firing experience here is indeed unusual. This rifle groups as well as any big-bore centerfire gun of comparable performance might. Once the rifle was zeroed, I could burst milk jugs until I got tired of doing it. The beautiful 2-pound trigger makes precision work easy off the bipod. At around 8 pounds, the rifle is light enough to use in the field but heavy enough to manage the recoil that physics dictates must arise out of throwing those massive slugs.

As the speed of sound in dry air at 68 degrees Fahrenheit is 1,025 fps, the Texan does not produce a sonic crack. However, the racket caused by chunking those big old bullets at nearly that speed will not lend itself to stealth. I opted for earplugs and suggest you do, too.

Gearing Up

AirForce Texan, AirForce Texan air rifle, AirForce Texan rifle, airforce airguns, airforce texan scope

An optional riser rail brings the rifle’s optics to the right level for a proper cheekweld.

AirForce produces everything you need to get the Texan shooting straight and hard. I opted for a 4-16x scope on a riser mount to match my cheekweld and a folding bipod. Like everything else AirForce sells, these accessories are of top quality and match the rifle perfectly.

RELATED STORY: 4 Reliable Factory Custom Shops For Your Next Rifle Build

The buttplate on the rifle is rigidly clamped to the air tank and is easily adjustable with included Allen wrenches. The air tank has a soft foam cover so you don’t yelp when settling into the rifle on a cold winter day. The polymer forearm on the rifle is sleek and cool, just like everything else.

The Texan’s barrel is German-made and selected for precision. The Spin-Loc tank mounting system allows the operator to tighten the tank in place finger-tight and then seal it with the included spanner wrench. A small setscrew then secures the Spin-Loc collar in place against accidental loosening. Our test rifle had a small leak in the valve that interfaces the tank to the gun, which kept the air rifle from holding its charge long-term. The guys at AirForce made that right in short order and the Texan subsequently rendered splendid service. I store my smaller AirForce Escape with the tank under pressure, and it does not seem to lose air even if it hangs on the wall for months on end.

AirForce Texan, AirForce Texan air rifle, AirForce Texan rifle, airforce airguns, airforce texan trigger

Meriwether Lewis and William Clark embarked on their two-year voyage of discovery in 1804 armed with, among other things, a state-of-the-art, .46-caliber Girandoni repeating air rifle. Designed by Batholomaus Girandoni in 1779, this remarkable rifle included a 20-shot, gravity-fed magazine and typically managed about 30 rounds per charge of air.

The rifle weighed about what a comparable musket might and required around 1,500 strokes on a hand pump to charge its air reservoir. The air rifle’s maximum effective range hovered around 150 yards, but it could be fired as quickly as balls might be indexed into the breach, an extraordinary feat for its day. In capable hands, the state-of-the-art Girandoni could keep the pot filled with venison.

Now fast-forward a couple hundred years and the AirForce Texan throws some truly massive slugs with enough wallop to drop most anything that walks. As there is no residue of combustion, maintenance requires nothing more than a good wipe down and a smidge of oil now and then. So long as the rifle is not abused, it should yield proper service for your grandchildren.

AirForce Texan, AirForce Texan air rifle, AirForce Texan rifle, airforce airguns, airforce texan tank

When fed by a scuba tank, the Texan will keep you in the field hunting until you get tired of doing it. It is also a simply splendid way to transform most any fluid-filled container into shredded rubbish at most any reasonable range. I defy you to explode a milk jug, or three, with this massively powerful air rifle and not grin doing it.

RELATED STORY: 9 Air Guns From The COMPLETE BOOK OF HANDGUNS 2016 Buyer’s Guide

AirForce makes air rifles for grownups. Its products exhibit superb engineering, exceptional attention to quality and trend-setting innovation. They are also designed and built right here in the U.S.A. Even for an old guy like me who has squeezed triggers all of my adult life, the AirForce Texan is legitimately new, different and cool.

AirForce produces air rifles in a variety of shapes and sizes for target, utility and big-bore applications. By carefully selecting the right rifle for your application, you can legitimately put a trophy buck on your wall or drop the meanest feral hog with an air gun. Any misconceptions you might have had about air rifles being for kids are dispelled the moment you squeeze that trigger.

For more information, call 877-247-4867 or visit http://www.airforceairguns.com.

This article was published in the 2016 issue of Gun Buyer’s Guide. For information on how to subscribe, please email Subscriptions@athlonmediagroup.com or call 1-800-284-5668

Save

Save

The post The AirForce Texan: Not Your Grandfather’s Air Rifle appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Traditions Performance Firearms Add Mountain Rifle To Line

$
0
0

The following is a press release from Traditions Performance Firearms

Traditions is excited to introduce into their line the Mountain Rifle as well as the Mountain Rifle Build-It-Yourself kits.

Based off of a Jacob and Samuel Hawken design, the Mountain Rifle was the inseparable companion of fur trappers and American explorers alike. Part of the “plains rifle” family, the Mountain Rifle could be found on the horsebacks of fur trappers looking for beaver and other pelts thanks to its long barrel which enabled this rifle to take targets at longer distances. American explorers also were partial to this rifle due to the longer barrel.

RELATED STORY: The Quest For More Firepower

Traditions Mountain Rifle in .50 caliber is reminiscent of the gun used back in this time period of America. While the original had a rust brown finish on the barrel, Traditions has selected a Brown CeraKote Finish which replicates this finish while providing increased corrosion resistance. These rifles feature a 32” octagonal barrel, Patch Box, custom scrolled trigger guard, 1:48” twist, double set trigger, wooden ramrod, hexagonal thimbles, 2 tennon design, adjustable rear sight, and more. It is available in Percussion or Flintlock.

Traditions is also introducing the Mountain Rifle in percussion or flintlock as a Build-It-Yourself kit. One of the best ways possible to get a real hands-on muzzleloading experience is to build it yourself! While the barrel does not have the CeraKote finish and the stock is unfinished, this allows for customization to specific tastes.

RELATED STORY: Making History – GLOCK Pistols at the Cody Firearms Museum

Traditions is currently shipping these products. Please check with your distributor/s or contact Traditions for more information.

Known for their accurate, innovative, and dependable firearms, Traditions has been providing quality firearms for the past 30 years. Traditions offers blackpowder rifles and pistols, cartridge rifles and revolvers, blank pistols, Build-It-Yourself rifle and pistol kits, and cannons as well as a full line of accessories and optics. For more information on Traditions Performance Firearms, their website at www.traditionsfirearms.com, find them on Facebook and Twitter, or call 860.388.4656.

The post Traditions Performance Firearms Add Mountain Rifle To Line appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Are You A Rifleman? Put Your Skills To The Test

$
0
0

What is a rifleman? Merriam Webster defines a rifleman as a soldier who carries a rifle or as someone who is skilled at shooting a rifle. Both definitions are exceedingly vague and are like saying, “If you carry a wrench, you’re a mechanic.” To me, a rifleman is someone who does not just carry a rifle but someone who has demonstrated a certain level of skill with a rifle. Police departments and military organizations have qualification standards that, for the most part, are representative of the work a cop or soldier might be expected to do with a rifle. For the common gun owner and from a practical standpoint, police and military standards may not apply.

While working as a soldier and later as a cop, part of my duties was firearms training and administering qualification courses. That experience, in conjunction with my own time in the field, and the knowledge I’ve gained from the excellent instructional programs offered by the Gunsite Academy, has allowed me to put together what I would call a generalized test for riflemen.

Making The Grade

rifleman, rifles, rifle, shooting rifle, shooting rifles, prone position rifle

Prone Position: Position your body at about a 30-degree angle to the target. Your toes should be pointed outward; do not dig them into the ground. Your support arm goes under the rifle.

A test allows you to establish competency, but the best tests should also serve as a training drill to help build competency. At the same time, if you’re going to establish a performance standard, which rates a title such as rifleman, then that title needs to be defined. If you tell someone you’re a rifleman, they need to understand what that means. My definition of a rifleman, while it may not be agreeable with others, sets forth a skill set that can be demonstrated on demand. This skill set includes three simple tasks, two of which are straightforward and one that deserves a bit more explanation.

1. Safely and correctly load the rifle.
2. Safely and correctly unload the rifle.
3. Shoot with efficiency from the four basic unsupported positions.

rifleman, rifles, rifle, shooting rifle, shooting rifles, sitting position rifle

Sitting Position: There are several ways to shoot from the seated position; the most stable is the one where your rifle is the closest to the ground. Cross your feet and, leaning forward, place your elbows in front of your knees.

The positions are prone (where your stomach is on the ground), sitting (where your butt is on the ground), kneeling (at least one knee is on the ground) and standing (both feet are all that’s touching the ground). Additionally, regardless of the position, the rifle may not be touching anything but your body parts, and your body parts my not be touching anything but the ground. In other words, no support other than a shooting sling.

RELATED STORY: Dry-Fire Practice – The Key to Improving Your Shooting Skills

Defining “efficiency” will vary depending on who’s answering the question. My definition is based on my field experiences and is tempered by three factors: distance, target size and time. It’s also prescribed under the premise that a rifleman’s job is to put his sights on the target, pull the trigger and get a hit. It should not be a measure of the shooter’s ability to estimate range and apply ballistic solutions. These are elements of long-range or target shooting.

If a rifle-shooter can always, on demand, hit a 5- or 6-inch target set between 50 and 100 yards from the four basic positions, within a restrictive time limit, then they can be considered a rifleman. You may or may not agree, arguing that this is too simple of a requisite. Before passing judgment, I urge you to attempt the following drill.

Pass Or Fail

rifleman, rifles, rifle, shooting rifle, shooting rifles, standing position rifle

Standing Position: In the standing position, your legs should be about shoulder-width apart with your support-side leg slightly forward. Your elbows should be low and under the rifle.

You’ll need a 100-yard rifle range, 10 rounds of ammunition, 4-, 5- or 6-inch targets, a shot timer and a buddy to help with administering the exercise. Place one target at 40 yards, one at 60 yards, one at 80 yards and one at 100 yards. You’ll have one minute to fire 10 shots, but each shot is timed separately. Four shots must be fired from standing, three from kneeling, two from sitting and one from prone. You can shoot at any target you choose, from any position, as long as at the end of the exercise there are four hits on the 40-yard target, three on the 60-yard target, two on the 80-yard target and one on the 100-yard target.

The start position for every shot is standing at port arms with the muzzle pointing skyward. When the timer sounds, assume your position of choice and engage a target. The timer stops at the shot, and the time is recorded. When all 10 shots have been fired, total the times; they should be less than 60 seconds. This is a “go/no go” exercise. To pass, you must fire all 10 shots within the specified time period, and there can be no misses. Since the range to the targets is not excessive and the targets are not terribly small, this drill can be performed with any rifle in any chambering—a .22 will work the same as a .30-06.

RELATED STORY: Hitting the Bullseye – Improving Your Shooting Skills Through Visualization

There are a few other disqualifying actions beyond missing and exceeding the time limit. If your rifle becomes empty at any time between shot one and 10, you fail. You must keep your rifle loaded throughout the exercise. An accidental discharge, a failure to engage the safety between stages, having your finger on the trigger while moving, or any other safety violation should also result in a “no go” score.

Not only is assuming each position correctly critical to making the hit within the time limit, but the smart rifleman will choose the best position for each shot depending on the degree of difficulty, distance, time and terrain. In most cases, the four shots at the 40-yard target would be fired from the standing position, the three shots at the 60 yard target from kneeling, the two shots at 80 yards from sitting and the single shot at 100 yards from prone. However, a shooter’s ability to assume these positions correctly, along with the time it takes to get into each position should also have a bearing on the position to be chosen.

I routinely use this evaluation drill year round on my personal shooting range here in West Virginia that we call Shadowland. I call it the “Shadowland Rifleman’s Test,” or SRT. In fact, it is permanently set up in the woods, with steel targets positioned at the required distances. It’s a great exercise to work through when preparing for a hunt or just to keep skills sharp. But it’s not just a test.

You can work through the exercise untimed or with more generous time limits and use the drill as a way to improve your skills. It’s okay to use targets with scoring rings, but it’s not necessary—steel targets work perfectly, and with them you’ll never have to walk downrange. This increases your time behind the rifle and allows you to learn more and walk less.

Earning The Title

rifleman, rifles, rifle, shooting rifle, shooting rifles, kneeling position rifle

Kneeling Position: When kneeling on one knee without a support for your rifle, your support elbow goes in front of the knee and should be directly under the rifle. A shooting sling can add stability.

There are a number of things to work on when using this drill for training or practice. You can develop your ability to swiftly assume each shooting position. You can perfect mounting the rifle so it naturally comes up to your eye and on target. You can do some calisthenics before each shot to increase your heart rate as this will stimulate the stress of the clock and adrenaline. If you get to the point where the drill is no longer a challenge, you can even reduce the size of the targets and make the shooting more difficult. You can also restrict the total time available to get your 10 hits.

When using a shot timer to help you train, first conduct the drill as precisely as possible with an emphasis on using the correct position and getting the hit. Time this run, and consider the results your base time. Now, using the shot timer, work to increase your speed. Take small steps. Don’t try to go from 10 seconds to five. At first, strive for a nine-second run, then an eight and so on. The notion is that the faster you can complete the drill, the more efficient you are at shooting your rifle.

When you can run through the SRT drill, mistake-free, in less than 60 seconds, any time and every time, you’re a rifleman in my book. The great thing about this exercise is that it does not require a 300-yard range or some super-flat-shooting rifle. It’s a test that should be able to be performed at most any shooting range, with most any rifle.

This article was published in the 2016 Gun Buyer’s Guide. For information on how to subscribe, please call 1-800-284-5668.

Save

The post Are You A Rifleman? Put Your Skills To The Test appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Rimfire Regulator: The Alexander Arms .17 HMR

$
0
0

Rarely is something AR related truly novel anymore, and rarely is a rifle this much fun to shoot. Alexander Arms has managed these two extraordinary feats somewhat quietly with several rifles, almost as if shaking up the modern sporting rifle world is the company’s day job, which, actually, it is. And it’s extremely good at it. Case in point is Alexander Arms’ AR-pattern .17 HMR, which is so humble it doesn’t have a special name or designation, just a catalog number. But boy, does it do some work out in the country.

Alexander Arms was founded by Bill Alexander, a top armorer from the United Kingdom who has extensive experience developing firearms, ammunition (he invented the .50 Beowulf and co-invented the 6.5 Grendel) and armor, giving him experience in both improving armor and defeating it in new and curious ways.

He moved to America to pursue the creation of his own design and manufacturing firm, to produce truly innovative firearms chambered for the cartridges he created (and a few standard ones, too). Fifteen years on, his company, Alexander Arms, with its manufacturing facility on the Radford Arsenal in southwestern Virginia, produces AR-pattern rifles chambered for .50 Beowulf, 6.5 Grendel and 300 Blackout. Bill and his team have had plenty of successes already by making non-standard cartridges work extremely well in the AR platform.

Now they’ve moved into rimfires, choosing to adapt the AR platform to the hot little .17 HMR cartridge instead of the obvious .22 LR. Why? Because it gives the market an amazingly versatile platform for that cartridge as its popularity spreads through the sporting community. Also, not insignificantly, to see if they can do it. And boy, can they ever.

Varmint Hunter

alexander arms, alexander arms .17 hmr, alexander arms 17 hmr, alexander arms rifle

Alexander Arms’ newest rifle combines the ergonomics and accuracy of the AR platform with the lightning-fast .17 HMR for varmint hunting.

Hornady and Winchester push their 17-grain .17 HMR projectiles to 2,550 fps. CCI pushes its projectile to 2,650 fps. Despite the projectile’s weight, that’s good for 246 foot-pounds of energy for the Hornady and Winchester loads, and 265 foot-pounds for CCI.

Those cartridges each feature polymer-tipped projectiles that offer explosive (figurative) expansion because they have to. The .17 HMR is designed to be used against varmints and effective against coyotes and similar-size creatures. There’s not much projectile-stopping mass to a prairie dog or a squirrel, and not much distance in which to stop it, either. Thus, the projectiles are designed to immediately expand upon contact, to transfer as much energy into the target as possible during its brief passage through the target. The results on small game are devastating and best applied to pest control, where you don’t intend to eat what little is left.

RELATED STORY: Gun Review – Savage Arms Model 25 Walking Varminter Camo

We learned this when taking the Alexander Arms .17 HMR afield on a squirrel hunt to test its all-around handling. The rifle performed like a dream, displaying the characteristics we love about fielding AR-pattern rifles: their relative light weights, easily manipulated fire controls, instinctive pointing and their ability to hold position off-hand as targets slow down to afford a shot. I collapsed the stock one position from its length during zeroing to accommodate a heavy winter coat, and the triggerguard had no problems accommodating thin gloves.

The .17 HMR cartridge did an excellent job of dispatching a trio of squirrels, with a few shots overperforming by removing a bit too much of the already meager amount of meat we were after. For pest control, though, the more destructive the terminal performance the better, and the .17 HMR provided plenty of that.

Rimfire AR

alexander arms, alexander arms .17 hmr, alexander arms 17 hmr, alexander arms rifle, ar rifle

The flattop upper receiver makes it easy to add optics, and the lower has traditional AR controls.

This rifle is a blowback-operated semi-automatic that accepts 10-round, detachable magazines. The polymer mags are shorter, narrower and skinnier than standard magazines, so the mag well has a flush-fitting sleeve that is pinned in place and not intended to be removed.

The bolt is a clever unit that combines both bolt and bolt carrier group into a single piece of metal that rides inside the upper receiver, with a rimfire-style bolt face and massive extractor claw. A milled metal bar bolts to the top, providing a stepped face that can interact with the charging handle for manually retracting the bolt. The rear of the bolt features a large oval relief just like on the carrier in an AR, through which the hammer swings to impact the rear of the firing pin.

RELATED STORY: 20 Modern Rimfire Rifles From COMPLETE BOOK OF RIMFIRES 2015

There is no rotating bolt head, no cam and none of the complexity of an AR’s bolt carrier group largely because the .17 HMR has a lower operating pressure and much less kinetic energy to cycle such lockwork, and partly because it’s not needed to hold the bolt closed quite so long as with 5.56mm ammunition. The bolt begins its rearward journey after the cartridge’s rearward energy overcomes its inertial resistance to motion, and the case’s pressure goes down just enough to unstick it from the chamber. Then the whole unit lurches rearward, partially into the receiver tube—just like on any other AR—and is then driven home under spring pressure, stripping a new round from the magazine in the process.

As with any blowback design, this means the receiver gets regular blasts of hot air with unburned powder, but this rifle receives no more so than any other blowback rifle. Possibly less, actually, with the added mass of this very large bolt keeping it closed just that tiny bit longer.

Charging the rifle is the same process as on any AR—via the charging handle beneath the receiver-length Picatinny rail. The safety and magazine release are also the same as you would expect from an AR. The only other significant outward differences are the lack of a forward assist on the starboard side and a lack of a bolt release on the port side. (The bolt is not held open after the last round has been fired, so there is no need for one.)

Range Time

alexander arms, alexander arms .17 hmr, alexander arms 17 hmr, alexander arms rifle, rifle controls

We experienced only two quirks during all of our testing. When the rifle arrived, the rear receiver pin was standing proud by the exact thickness of the receiver’s left wall. No amount of pushing or wiggling got it into place, so, daring fate, we tested the rifle with the pin not completely seated. It worked just fine, and if the rifle were ours, we’d just bang it in there with a hammer and be done with it.

The other issue was the 2-percent failure rate of the Winchester ammunition. It was a consistent two out of every hundred that failed to ignite, over the course of roughly 400 rounds. The suspect duds were run through again, rotated so the firing pin would hit a different part of the rim. None of the first-time duds ignited with the second strike, absolving the rifle. Since the ammunition was all from the same batch, it’s likely an anomaly.

RELATED STORY: .338 War Hammer – Alexander Arms’ Ulfberht

One spent case—a CCI case, though we’re not sure if the brand mattered—got pinched in the space above the bolt, inside the charging handle’s shaft, deforming in a way that locked its rim against the charging handle interface. It took a pair of pliers to extract, but the rifle never again gave any problems in more than 800 rounds of testing. What caused that problem? It beats me.

We topped the Alexander Arms .17 HMR with a Weaver Kaspa 2.5-10x 50mm tactical scope, a scope that has proven itself with 5.56mm ammunition on other platforms. It was significant overkill for squirrels, though it was just about ideal when we hit the range. Then we moved to 75 yards, where we noticed what was essentially no change in point of impact. Shooting at a nearer berm, there was the same imperceptible change of point of impact, a testament to the flat trajectory of the .17 HMR within 100 yards.

So we backed up to somewhere just beyond 200 yards. We’re not sure how far, precisely, because our obscure, private test range in the back of beyond wasn’t set up for shooting that far back. The field was also unaccommodating of specific range distances, or even comfortable shooting rests, so we kneeled behind a rock and fired 20 shots at our standard accuracy target.

alexander arms, alexander arms .17 hmr, alexander arms 17 hmr, alexander arms rifle, rifle controls

The results were a very pleasing group 3.76 inches in diameter (center to center) that printed about 2.5 inches high and just slightly to the right—likely the effect of improper trigger pull. Certainly the rifle is capable of better. I expected it to print about 6 inches low as that’s what the ballistic charts say. It didn’t. We think the height of the scope above bore line and a change in eye position relative to the rear objective, mixed with a bit of .17 HMR black magic and the steady hand of el Niño, combined to raise that impact point. Then again, maybe it was the coffee.

RELATED STORY: Whitetail AR – Alexander Arms’ Game-Taking 6.5 Grendel

In any event, a center hold anywhere from 25 to 200 yards should result in a hit on anything larger than a chipmunk. During our hunt, shots ranged from dead-horizontal at 20 or so yards, to nearly 80 yards at a steep upward angle (backstopped by a giant oak tree, as you cannot allow projectiles to just whistle through space). The rifle never missed. The squirrels fell. The ammunition did its job marvelously.

This would make a great AR-pattern rifle for varmint hunting and pest control, small game hunting and even taking on coyotes if for some reason you don’t want to use a .223. It’s an absolute blast to shoot, and with its lack of muzzle blast and recoil, it would be perfect for younger shooters or those with smaller frames who want to field an AR. You can’t go wrong here.

For more information, visit http://www.alexanderarms.com or call 540-639-8356.

This article was published in the 2016 issue of Gun Buyer’s Guide. For information on how to subscribe, please email Subscriptions@athlonmediagroup.com or call 1-800-284-5668

Save

Save

The post Rimfire Regulator: The Alexander Arms .17 HMR appeared first on Gun News | Gun Reviews | Gun Magazine: Personal Defense World.

Viewing all 626 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>